CHENERSPORTS PRODUCT CARE

Care for What Moves With You.

Proper washing, drying, storage, and everyday care can help activewear maintain its fit, feel, stretch, and appearance. Use this guide as a general reference and always follow the care label attached to your specific chenersports product.

01

Start With the Care Label

The care instructions sewn into or supplied with your product are the most important source of care information. Different fabrics, trims, prints, coatings, elastic fibers, and product constructions can require different treatment.

01 Read the Care Label

Check washing temperature, drying, bleaching, ironing, and other instructions before the first wash.

02 Check the Product Page

Use any product-specific fabric or care notes provided for the item.

03 Use This Guide

Use the recommendations below as general activewear and fitness-product care guidance.

Product-specific instructions take priority

If this general guide differs from the label attached to your garment or the instructions supplied with a product, follow the product-specific instructions.

02

Understanding Common Activewear Fabrics

Chenersports products may use different materials depending on the style. The fabric composition shown on the individual product page or garment label is the best source for the material used in your item.

POLYESTER Common in performance apparel

Often used in training clothing because it can be lightweight and practical for active use. Heat and harsh treatment can affect some finishes.

POLYAMIDE / NYLON Smooth, flexible feel

Frequently used in leggings and activewear blends. Gentle washing and avoiding excessive heat can help protect the fabric.

ELASTANE / SPANDEX Stretch & recovery

Often blended into fitted activewear. High heat, chlorine, and harsh chemicals can reduce the life of elastic fibers.

COTTON & BLENDS Soft everyday comfort

Cotton or blended fabrics may be used in casual training pieces. Follow the label carefully because shrinkage and drying requirements can vary.

BRUSHED / SOFT-TOUCH FABRICS Comfort-focused surfaces

Soft or brushed finishes can show friction and pilling over time. Wash with compatible garments and avoid rough fasteners.

MIXED MATERIALS Care for the complete garment

Mesh panels, prints, elastic bands, bonded seams, zippers, and trims may require gentler care than the main fabric alone.

Fabric names describe composition, not guaranteed performance

Actual feel, stretch, thickness, support, and performance depend on the complete fabric construction and garment design—not only the fiber name.

03

Before You Wash

A few simple steps before washing can help reduce unnecessary friction, stretching, color transfer, and damage to technical fabrics.

  • Check the care label before every first wash.
  • Empty pockets and remove detachable items where instructions allow.
  • Close zippers, hooks, and fasteners to reduce snagging.
  • Turn printed, brushed, or delicate activewear inside out where appropriate.
  • Separate lights, darks, and strongly colored garments.
  • Avoid washing delicate activewear with rough items such as towels, denim, or exposed hook-and-loop fasteners.
  • Wash sweaty clothing reasonably soon rather than leaving it damp for long periods.
Use a laundry bag when appropriate

Sports bras, strappy tops, or delicate pieces may benefit from a mesh laundry bag if the product care label permits machine washing.

04

Washing Activewear

For many technical activewear pieces, a gentle wash can help protect stretch, shape, surface finish, prints, and elastic components. Always check the label first.

01Use a gentle cycle

Where machine washing is permitted, a gentle or appropriate sportswear cycle can reduce abrasion.

02Use cool or label-approved water

Excessive heat may affect some elastic fibers, prints, or finishes.

03Choose suitable detergent

Use an appropriate amount of mild detergent and avoid unnecessary overdosing.

04Rinse thoroughly

Excess detergent can remain in fabric when too much product is used.

About bleach and fabric softener

Do not use chlorine bleach unless the care label specifically permits it. Fabric softener can affect the feel or moisture-management properties of some technical fabrics, so avoid it when the product label advises against it.

Hand washing

If the label requires hand washing, use cool or label-approved water, suitable detergent, and gentle handling. Avoid aggressive twisting or wringing that may distort the garment.

05

Drying & Heat

Drying method can have a significant effect on elastic fibers, bonded details, prints, and fabric shape.

  • Follow the drying symbol and instructions on the care label.
  • Air drying is often a gentle option for technical activewear where permitted.
  • Avoid excessive dryer heat unless the label specifically allows the selected setting.
  • Reshape garments gently after washing where necessary.
  • Do not place wet activewear directly on a radiator or other high-heat surface.
  • Keep brightly colored garments away from prolonged intense sunlight if fading is a concern.
Lower Heat ExposureGenerally gentler on technical fibers
High Heat ExposureCan increase risk of shrinkage or elastic damage
Do not assume every product can tumble dry

Some products may permit tumble drying while others may require line or flat drying. The product label always takes priority.

06

Care by Activewear Type

Different activewear categories experience different types of stress during use and washing.

LEGGINGS & FITTED BOTTOMS Protect stretch and surface finish
  • Turn inside out where appropriate.
  • Avoid rough garments or exposed fasteners.
  • Use label-approved washing and drying temperatures.
SPORTS BRAS Protect straps, elastic & shape
  • Close hooks where applicable.
  • Use a mesh laundry bag when appropriate.
  • Avoid twisting or stretching while wet.
TOPS & TRAINING TEES Reduce print and surface wear
  • Turn printed pieces inside out when appropriate.
  • Do not iron directly over heat-sensitive graphics.
  • Follow the care label for drying.
JACKETS & LAYERS Check hardware and mixed materials
  • Close zippers before washing where appropriate.
  • Check special instructions for coated or bonded details.
  • Reshape gently after washing if needed.
07

Odor, Sweat & Stain Care

Sweat, deodorant, body oils, cosmetics, dirt, and repeated training can leave odor or marks on activewear. Treat problems gently and as soon as practical.

For everyday odor

  • Allow damp garments to air out rather than leaving them sealed in a gym bag.
  • Wash according to the care label after use.
  • Use the correct amount of suitable detergent.
  • Make sure the garment dries completely before storage.

For stains

  • Blot rather than aggressively rubbing fresh stains where possible.
  • Use a stain treatment that is compatible with the fabric and care label.
  • Test unfamiliar treatments on a hidden area first where practical.
  • Avoid chlorine bleach or harsh solvents unless the care instructions specifically allow them.
  • Do not apply high heat to a stain before it has been removed, as heat can set some stains.
Deodorant and makeup marks

Treat gently. Aggressive scrubbing can damage brushed, printed, or soft-touch activewear surfaces.

08

Storage & Everyday Handling

Clean, fully dry products generally store better than damp or heavily soiled ones.

  • Allow garments to dry completely before folding or storing.
  • Avoid leaving damp activewear in closed gym bags for extended periods.
  • Store away from excessive heat, direct sunlight, and sharp objects.
  • Do not place heavy objects on structured or padded garments for long periods.
  • Keep hook-and-loop fasteners, sharp zippers, and rough surfaces away from delicate fabrics.
  • Fold or hang according to the garment's structure and available space.
Long-term storage

If activewear will not be used for an extended period, store it clean, dry, and in a well-ventilated environment.

09

Fitness Equipment & Accessory Care

Fitness equipment and accessories require different care from apparel. Always follow any product-specific instructions supplied with the item.

YOGA MATS Wipe & dry

Use a cleaning method compatible with the mat material. Allow the surface to dry before rolling or storing.

RESISTANCE BANDS Inspect before use

Keep away from sharp objects and excessive heat. Stop using a band if you see cracks, tears, or material deterioration.

FOAM ROLLERS Surface care

Wipe with a compatible cleaner and dry fully. Avoid harsh solvents unless the product instructions permit them.

GYM BAGS & ACCESSORIES Clean by material

Empty after use and follow material-specific cleaning instructions. Allow damp items to dry before storing inside.

TRAINING STRAPS / GLOVES Dry after training

Follow the label for washing. Airing products after use can help reduce retained moisture and odor.

WEIGHTS / HARD EQUIPMENT Keep clean & dry

Wipe surfaces appropriately and inspect for damage before use. Store securely and use only for the intended purpose.

Safety comes first

Do not continue using fitness equipment that appears structurally damaged, cracked, torn, loose, or unsafe. Contact us if you believe the issue may be a manufacturing defect.

10

How to Read Care Instructions

Care labels use instructions that describe how a product should be washed, bleached, dried, ironed, or professionally cleaned. The exact symbols can vary by market, so use the wording and symbols provided on your actual garment.

WASHWater & washing method

Look for maximum temperature, machine-wash, gentle-cycle, or hand-wash instructions.

BLEACHWhether bleach is permitted

Do not use bleach when the label prohibits it.

DRYTumble / line / flat drying

Follow the permitted method and heat level.

IRONIroning temperature

Heat-sensitive technical fabrics, prints, or bonded details may require low heat or no ironing.

CLEANProfessional cleaning

Some garments may specify whether dry cleaning or professional wet cleaning is permitted.

Do not guess from another garment

Two products that look similar can contain different fibers or trims. Read the care label on the specific product you are washing.

11

Fabric & Care FAQs

Common questions about washing, drying, pilling, odor, and everyday activewear care.

12

Care, Normal Wear & Warranty

Proper care can help protect the useful life of activewear, but normal wear and manufacturing defects are different issues.

NORMAL CARE / WEAR Usually not a manufacturing defect
  • Gradual pilling from friction
  • Fading from repeated washing or sunlight
  • Normal long-term elasticity change
  • Damage caused by incorrect washing or high heat
POSSIBLE PRODUCT DEFECT Contact us for review
  • Defective stitching or assembly
  • Seams failing under normal intended use due to workmanship
  • Structural product failure attributable to manufacturing
  • Material defect materially affecting normal use

See our Warranty for the full limited-warranty terms.

PRODUCT CARE SUPPORT

Not sure how to care for your item?

Send us the product name, order number if applicable, and a photograph of the care label or product. Our customer-service team can help you interpret the information available for that item.

Guangzhou Chener Sports Goods Co., Ltd. Room 06 (Unit 201, No. 2-1 Yingcai Street), Tianhe District, Guangzhou City FrancisShaw621@outlook.com